logo
Invia messaggio

ASLI Brand Climatic Chambers Thermal Shock Chamber

1
MOQ
ASLI Brand Climatic Chambers Thermal Shock Chamber
Caratteristiche Galleria Descrizione di prodotto Richieda una citazione
Caratteristiche
Specificazioni
Dimensione interna: L500*A400*P400mm
Accuratezza dell'analisi: 0,1 gradi C
Uniformità della temperatura: +/-2,5 gradi C
Materiale interiore: Acciaio inossidabile SUS304
Porta di prova: Porta singola
Intervallo di temperatura: -40°C~+150°C (200°C opzionale)
Gamma ad alta temperatura: +60°C~+150°C (200°C opzionale)
Gamma a bassa temperatura: -10°C~-40°C/-55°C/-65°C
Tempo di esposizione: 30 minuti
Tempo di riscaldamento: RT~200°C/45min
Tempo di raffreddamento: RT~-75°C/100min
Tempo di recupero: ≤5 min
Tempo di conversione: ≤5 sec
Precisione del controllo: ± 0,5 ° C.
Alimentazione elettrica: CA220V/50/60HZ, CA380V/50/60HZ
Evidenziare:

ASLI thermal shock test chamber

,

climatic chamber for environmental testing

,

thermal shock chamber with warranty

Informazioni di base
Luogo di origine: Guangdong, Cina
Marca: ASLI
Numero di modello: TS-80-A
Termini di pagamento e spedizione
Descrizione di prodotto
ASLI Brand Climatic Chambers Thermal Shock Chamber
The Programmable Thermal Shock Test Box, also known as hot and cold impact testing machine or temperature impact test box, is designed to test material structures or composite materials under extreme temperature variations. It evaluates the material's ability to withstand rapid transitions between very high and very low temperatures, revealing potential thermal expansion-induced chemical changes or physical damage in the shortest possible time.
Suitable for testing metals, plastics, rubber, electronic materials, and more, this chamber provides valuable data for product improvement and quality assurance.
Technical Specifications
Model TS-42(A~C) TS-80(A~C) TS-150(A~C) TS-252(A~C) TS-450(A~C)
Internal Dimension W×H×D (mm) 400×350×350 500×400×400 600×500×500 700×600×600 800×750×750
External Dimension W×H×D (mm) 1400×1800×1400 1550×1950×1550 1600×2000×170 1700×2100×1750 1800×2200×1900
Temperature Range Type A: -40°C to +150°C (200°C optional)
Type B: -55°C to +150°C (200°C optional)
Type C: -65°C to +150°C (200°C optional)
Exposure Time High Temperature: +60°C to +150°C (200°C optional) - 30 minutes
Low Temperature: -10°C to -40°C/-55°C/-65°C - 30 minutes
Temperature Recovery/Conversion Time ≤5 minutes / ≤5 seconds
Control Accuracy/Distribution Uniformity ±0.5°C / ±2°C
Construction Materials Inner box: SUS 304# stainless steel
Outer box: Stainless steel or SEE cold-rolled steel with paint coating
Insulation Material High temperature resistant, high density formate chlorine ethyl acetum foam
Cooling System Semi-hermetic double-stage compressor (water-cooled type)
Hermetic double-stage compressor (air-cooled type)
Power AC220V, 50/60Hz or AC380V, 50/60Hz
Weight (Approx. kg) 450 600 750 950 1200
Key Features
  • Uses aluminum pieces to verify machine load capacity (not plastic load)
  • Sensor placement in test area rather than wind crossing, ensuring experimental effectiveness
  • Test area humidity conforms to standard requirements
  • Can expand surface temperature measurement and control dwell time to shorten test duration
  • Compatible with multiple international testing standards and conditions
  • Capable of 0°C low temperature impact testing with energy-saving operation
ASLI Brand Climatic Chambers Thermal Shock Chamber 0 ASLI Brand Climatic Chambers Thermal Shock Chamber 1 ASLI Brand Climatic Chambers Thermal Shock Chamber 2
For more information about our Programmable Thermal Shock Test Boxes, please don't hesitate to send your inquiry.
Prodotti raccomandati
Mettetevi in ​​contatto con noi
Persona di contatto : Miss. Lily Chen
Telefono : 86-13543715035
Fax : 86-769-22851784
Caratteri rimanenti(20/3000)